The most important thing to consider is that the front end of the vehicle must be 8 feet off the truck’s rear. The person will have enough room to get the car onto the truck. The next step is to make use of the control system on the truck to push the bed approximately 4 feet before tilting it down on it simultaneously. This movement places the bed at an angle relative to the vehicle, which makes lifting it easier.
Once the bed has been put placed, one can feel confident enough to unwind the cable and place it to the side of the car. After that, the individual must check their vehicle to make sure it’s in park before getting under it and connecting the cable.
There should be spots on the side of the front tires where it is possible to connect cables. This is what the driver should follow up on the first side before moving to the other. After that, the person needs in the process of winching the vehicle slightly. Once the winch has been locked in, it’s safe to place the car in neutral. Then, you can pull the vehicle forward to lock in the winch. bcd5fg4ils.